Porta-bote Again
June 16th, 2007 by: joshuaWell we’re tired of talking about our porta-bote seat and transom woes, but I promised Sandy (the president of porta-bote) that I would follow up when we received the new parts. After much confusion on everyone’s part and far too many emails, porta-bote lived up to its promise to replace our transom and seats under warranty (even though it had officially expired when we reported problems). Thanks porta-bote! We didn’t even have to pay for shipping. The new seats we received appear to be identical to the old ones. However, the transom has reinforcing at the bottom near the center. I’m not sure it’s enough, but I take this as a good sign that porta-bote is exploring ways to reduce the incidents of transom and seat failure.
[Closeup of reinforcing on the new transom]
This is a follow up to older stories:
1.3-Year Porta-Bote and Kayak Review
Follow-up Porta-bote Review and Aftermath
Porta-bote Redux Redux
September 6th, 2007 at 9:21 am
[…] Follow-up Porta-bote Review and Aftermath Porta-bote Redux Redux Porta-bote again […]
September 26th, 2007 at 10:28 am
Hello all – I recently aquired the 14′ model and I am extremely pleased with the overall product – upon receipt of the original craft, I immediatley knew the transom was not of adequate design – I immediatly fashioned a reinforced transom insert and seatbackings out of 1/4″ 5016 aluminum – no problems at all – I have further manufactured aluminum brackets to fit directly on ice chest sides to replace one of the aft seats – the sides were also giving me difficulty upon accelaration under the power of my 4 stroke yamaha – I resolved this issue as well by lacing a 2″ heavy duty ratchet strap around the top of the sides of the boat – and securing the strap to the reinforced transom using a pair of D hooks – the boat performs flawlessly I have gotten the boat to 40 mph and not a single worry or problem at all! – I further used alodyne to coat the 5016 alloy in a light gold color to prevent corrosion and oxidation and i can tell you this is the best small craft I have ever purchased – Granted the time and materials were pricey but what a great boat now – WOW!! If anyone is interested in a mod “kit” for their boats to make the craft perform as it should from the factory – I might manufacture these if there is enough interest.
thanks
May 14th, 2008 at 2:32 pm
Gubby,
Do you have pictures of your mods, along with a price quote? I’m interested in your mod kit. But I’d like to see some pictures first, if you don’t mind. Send them to winterdeal@hotmail.com. Thanks. David
May 25th, 2008 at 4:33 pm
I’d be interested in a upgraded transom for my 12′ porta-bote if you have an interest! Thanks a lot and great work!
jcalderwood07 [at] gmail.com
July 20th, 2008 at 10:40 pm
I might be interested in that upgrade/mod kit for my 14′ Porta-Bote. Pleases send pictures to halljmichael@aol.com
February 22nd, 2009 at 9:09 pm
Gubby,Id like to see the modifications also.I have a new 12′ portabote.are you making the parts? send to sp38@charter.net
March 3rd, 2009 at 12:02 pm
well … it’s 2009 and is everyone happy with their porta bote ?? i’m thinking of getting one … write me at pen@usa.com
June 1st, 2009 at 7:27 am
are you making the parts and what do they cost? I have a 2002 12ft.
June 11th, 2009 at 7:05 am
I have owned a 10ft. for over 2 years and run it with a 5 hp yamaha. The boat is a blast. ASide from a little leaking in the stearn from the seal of the transom, could not be happier. I am selling the 10ft. and going up to the 14 ft (to many friends keep calling to go fishing) Can’t wait .
July 24th, 2011 at 6:36 pm
Grubby,
I am very interested in your mod. I am willing to buy a kit from you. Please let me know if your still making the mod! Thanks.
August 29th, 2011 at 8:12 pm
I’m interested
March 15th, 2012 at 7:23 pm
I LOVE MY PORTA BOTE BUT IAM HAVING TROUBLE WITH THE REAR SEAT THE METAL LEGS PUSHED UP INTO THE SEAT AND BROKE IT IAM TRYING TO FIND A PRICE LIST FOR THIS
May 20th, 2013 at 11:27 am
Hi – I am looking to refurbish a 14 ft-er that I just got. Are you still making these mods?
Thanks,
Dave
July 25th, 2013 at 2:42 pm
I can help with some mods, reinforcement of the Cheap Plastic transom before it cracks. I can send a list of materials and pictures too. This boat stock has a lot of problems and the Back Bladder is known to CRACK whick cant be repaired, BEWARE